How To Take Apart A Wii


What screwdriver Do you need to open a Wii?

Use the Phillips #0 screwdriver to unscrew all three of the 4.1mm screws underneath the rubber feet. via

How do you disassemble a black Wii?

  • Step 1 Nintendo Wii Teardown.
  • One small screw holds the BIOS memory battery.
  • Remove these three black case screws.
  • Lift off the black plastic plate.
  • Remove all screws from the case.
  • Remove rubber feet and screws underneath.
  • Careful!
  • Now the case can be pulled apart.
  • via

    How do you open a Wii without Triwing?

    The small flat blade screwdriver is the easiest to try. The only trick is finding one that is small enough to fit into the center part of the Y-shaped recess in the tri wing screw. After that, it is simply a matter of applying enough force to turn the screw without overdoing it and causing the screwdriver to slip out. via

    Can you open Wii console?

    Power off the console and unplug the power cord for a few seconds. Plug the power cord back in and turn the Wii back on. At the "Health and Safety" screen, open the small door on the faceplate of the console. Use your Tri-wing and Phillips screwdrivers to remove these seven screws on the bottom of the Wii. via

    How do you take apart a Wii and clean it? (video)

    How can I clean my Wii?

  • Housing/Exterior. Spray a dry cloth with Windex or Simple Green then wipe the system down.
  • Vents. Use some type of dusting tool, including a dusting attachment for a vacuum.
  • Disc Trays.
  • System Buttons/Levers/Ports.
  • Residue left by vinyl stickers.
  • Lens.
  • via

    How can I fix my Wii?

    Most power issues with the Wii can be fixed by resetting the AC adapter. Unplug the AC adapter from both the outlet and the console and let it sit for at least 2 minutes. Plug both ends back in, making sure that the adapter is plugged directly into a wall outlet, not a surge protector or power strip. via

    How do you take the faceplate off a Wii?

  • Before disassembling the faceplate of your Nintendo Wii, you have to turn it off and unplug it for safety reasons.
  • With a tri-wing screwdriver, remove the two screws circled in red on the first picture.
  • Use the iSesamo and remove the front left pad of the game console.
  • Then gently pull on the front plate.
  • via

    Why won't my Wii read any disc?

    The Unable to read the disc error occurs on the Nintendo Wii when the console cannot properly read a disc due to the disc being dirty or damaged, a dirty laser lens, or a laser lens/optical-drive failure. The chances of one of these issues occurring increases the longer the console has been in use. via

    How do you remove a Wii screw? (video)

    How do you unscrew a screw without a screwdriver?

  • A kitchen knife. Choose one with a rounded tip, such as a butter knife.
  • A coin -- preferably a dime, which is thin enough to fit in most screw slots.
  • A credit card.
  • A rubber band.
  • A chisel, which does an even better job of turning single-slot screws than a flat-head screwdriver.
  • via

    What is a star screwdriver?

    Torx (pronounced /tɔːrks/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 by Camcar Textron. A popular generic name for the drive is star, as in star screwdriver or star bits. Torx screws are also becoming increasingly popular in construction industries. via

    How do you get 2 discs out of a Wii?

    Press and hold the eject button on the Wii console for five seconds. If the disc still does not eject, proceed to the next step. Unplug the power chord from the Wii console. Wait one to two minutes and then plug the power chord back in and repeat steps one and two. via

    How do I take apart my Wii U console? (video)

    How many Wii models are there?

    According to where I sourced this information, only THREE models of the Wii were released to the North American market: the RVL-001, the RVL-101, and the RVL-201. Numerous color variations and special editions were released, but all as a part of a particular build model. via

    Leave a Comment

    Your email address will not be published. Required fields are marked *