How Much Is Trex Decking

Trex decking board prices range from $5 to $12 per square foot, depending on the series. Each product features a 25-year limited warranty, to help protect against material defects or fading. Your choice depends mostly on your budget and the color selection. via

What is the average cost of a Trex deck?

Trex decking costs $1,600 to $9,600, averaging about $4,800. That's $5 to $12 per square foot for just decking boards and $5 to $15 per square foot for installation. via

Is Trex decking worth the cost?

Yes, worth it!

Yes, composite materials on decking and trim are worth the money. The labor to install composite is the same as the labor to install wood, which will rot and require a lot of maintenance. For example, the labor to replace a deck with Trex or wood might both be $4000. via

Can I install Trex myself?

Build Your Own Deck

Trex® engineered composite decking to be as simple to install as it is to care for. And to make it even easier, we've compiled all the resources you need to build a DIY deck. via

Is there a cheaper version of Trex?

Generally speaking, Trex and Fiberon offer the least expensive options while TimberTech and AZEK come in on the higher end. However, keep in mind that the higher-tiered grades of Trex are more expensive than the lower-tiered grades of Timbertech so it's important to make sure you're comparing apples to apples. via

What are the disadvantages of composite decking?

Cons of Composite Decking

  • A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood.
  • Composites aren't natural.
  • Composite decks aren't completely maintenance free.
  • You'll need to comparison shop.
  • via

    Can you pressure wash a Trex deck?

    Trex high-performance decking (Trex Transcend, Trex Enhance and Trex Select) can be power washed. Use only a fan tip and up to a 3100 psi power washer to remove dirt and debris. via

    How long will Trex decking last?

    Composite decking can last over 20 years with the proper care and maintenance. Composite holds up better under hot or cold weather shifts. Composite is resistant to rot, mold, and termites, which can take their toll on wood decking materials. via

    What is the cheapest way to build a deck?

    Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don't forget long-term costs. Wood decks require yearly maintenance and deteriorate quickly if they don't get it. via

    How much would a 20x20 deck cost?

    A 20x20 deck using the same material would cost $12,000 to $14,000. A 16x20 deck using premium wood or wood composites would cost $11,200 to $19,200. A 20x20 deck using premium materials would cost $14,000 to $24,000. via

    How much should I charge for labor to build a deck?

    Labor Costs

    Labor costs will total just about two-thirds of the total project cost. With contractors charging, on average, about $35 per square foot. For an average deck size between 200 and 500 square feet, you can expect to pay out between $7,000 and $17,000 just for installation and labor. via

    Is Trex cheaper than wood?

    An obstacle for Trex is that composites cost a lot more than natural wooden decking. By Trex's estimates, for a 16- by 20-foot deck, the materials outlay for its Transcend line are $2,714, almost five times that of regular wood ($577). via

    How much does a 10 by 10 deck cost?

    If using pressure-treated pine, you may pay between $1,061 to $2,350 for materials. Materials for that same 10' x 10' deck can cost between $3,003 and $6,297 if using exotic hardwood. Using composite to build a 10' x 10' deck can cost between $1,983 and $4,293. via

    What are the pros and cons of Trex decking?

    Trex Decking Pros

  • Less Time, Money and Effort on Maintenance.
  • Trex Decks are Environmentally-Friendly.
  • Industry-Leading 25-Year Warranty and Superior Durability over Other Decking Materials.
  • Trex Decks Are Safe.
  • Not As Hot As All-Plastic or Pressure-Treated Decks.
  • Big Selection of Colors and Materials.
  • via

    Leave a Comment

    Your email address will not be published. Required fields are marked *