How much does a cubic foot of concrete cost?
The average cost of concrete is $119 to $147 per cubic yard, which includes delivery up to 20 miles. Pouring plain concrete costs $5 to $10 per square foot depending on the quality, while colored, stamped, or stained concrete costs $8 to $18 per square foot to install. via
How do you figure cubic feet of concrete?
To determine how many cubic feet you need for a hole, measure the length, width, and thickness together, all measured in feet. So a 4" thickness is 4"/12" or 0.333 feet. The result of this Length x Width x Thickness multiplication is cubic feet. via
Is concrete cheaper by bag or truck?
Ready-mix is a no-brainer for mid- to large projects, but what about cost? If you use 60-pound bags, concrete for a patio this size ranges from $135 to $180. However, a fully loaded cement truck will hold 10 cubic yards—and partial “short” loads cost $15 to $20 extra for every cubic yard less than a full load. via
How many bags of concrete do I need for a 10x10 slab?
Regarding this, “how many bags of concrete do I need for a 10×10 slab?”, at 4 inches thick, generally you will need approximately either 74 bags of 60lb or 56 bags of 80lb premixed concrete for a 10×10 slab, at 5 inches thick slab, either 93 bags of 60lb or 70 bags of 80lb premixed concrete are required, while at 6 via
How many bags of concrete makes a yard?
60 cu ft. So it will take 45 bag to equal one cubic yard of concrete. If you have a project over a 1/2 a cubic yard you should consider our Mix On-site Concrete especially if you are hand mixing. You will be one tired puppy if you mix a yard of concrete by hand. via
What area does 2 cubic feet cover?
One 2 Cubic Foot Bag Covers
covers 8 sq feet. via
How many bags of concrete do I need for 2 yards?
If you're using 50lb bags of concrete, you'll need 72 bags to make a yard. If you're using 60lb bags of concrete, you'll need 60 bags to make a yard. If you're using 80lb bags of concrete, you'll need 45 bags to make a yard. via
How many feet are in a cubic foot?
One cubic foot is the equivalent to approximately 0.02831685 cubic metres, or 28.3169 litres. Common references: A standard (20 ft x 8ft x 8 ft 6 in) shipping container has a volume of 1,360 cubic feet. via
How much does a 20x20 patio cost?
How Much Does a 20x20 Paver Patio Cost? According to data from HomeGuide, a 20-foot by 20-foot paver patio runs from $1,900 to $6,800, including labor and materials such as clay brick, natural stone or concrete pavers. Obviously, the larger the patio, the more materials required and the greater the labor costs. via
Is it cheaper to pour your own concrete?
One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years. via
What does a yard of concrete cost?
Concrete Cost Per Yard
Concrete costs $100 to $200 per cubic yard, or around $125 on average. The total cost of concrete may vary depending on location, type of concrete and how much you order. *These prices reflect both the average $125 per cubic yard price plus short load fees. via
Should I mix my own concrete?
Mixing your own concrete is easy, and it works just as well as pre-mixed bags. It can be a great way to save money on a large-scale masonry project, allowing you to achieve excellent results without breaking the bank. via
How thick should a concrete driveway be?
As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage. via