How Long To Wait After Refinishing Hardwood Floors


How long does it take for polyurethane to dry on hardwood floors?

Polyurethane dries in 24-48 hours and takes about 30 days to fully cure. Your new hardwood floor is installed, and just one more thing needs to be done to protect the wood and bring out that beautiful grain. It's time to apply the polyurethane varnish. via

How soon can you clean refinished hardwood floors?

(To read more about the curing process and timeline, check out How long does it take for newly refinished floors to dry and cure?). You'll want to wait at least 15 days before using any cleaning product or water on your floors. But, you can use a dry microfiber mop once you reach the 7 day mark. via

How long does it take hardwood floors to dry?

For water-based finishes, the recommended wait time is 4-8 hours. For hard wax oils, this increases to 4-24 hours. Finally, for oil-modified Polyurethane, the surface will take between 12 & 24 hours to dry. via

Can you sleep in house after polyurethane?

We recommend a minimum of 2 days of socks-only traffic for floors finished with oil polyurethane. The house is not inhabitable for a minimum of 2 days after the job is completed, and better to stay out for at least 5 as the fumes/off-gassing is not advisable to breathe in, even if there are other rooms to sleep in. via

How long should you let polyurethane dry between coats?

Allow product to dry a minimum of 1-2 hours between coats. Sanding between coats is not required for adhesion as long as the time between coats is less than 6 hours. However, screening or sanding between coats usually produces a smoother better looking finish. A minimum of 3 coats of finish are recommended. via

Is Murphy's oil soap good for hardwood floors?

Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors. via

Can you stay in house while floors are refinished?

Even if it's not causing migraines, it's still uncomfortable to live in a house where the floor is being refinished and there are strong odors in the air. If yours is a professional space, it can compromise work quality and work productivity of the employees as well. via

How long after staining a floor can you walk on it?

You typically must wait 24 hours before being able to walk safely on the floor again, and as long as 72 hours before replacing furniture in the room. The drying period is a little annoying, but for a beautiful new finish and a dramatically transformed room, the wait's worth it. via

Is two coats of polyurethane enough on hardwood floors?


We recommend at least 2 coats of oil based polyurethane + a lacquer sealer coat as a minimum for hardwood flooring. Extra coats = extra protection, but only one coat of oil based polyurethane may be applied per day, as it needs 24 hours to dry before applying another coat. via

Should hardwood floors feel rough after refinishing?

When should you sand and refinish a rough feeling hardwood floor? If your floors were recently refinished and are rough, then screening and recoating should fix the issue. However, if it doesn't for some reason, maybe the grit was caught in the stain, then you'll have to completely sand and refinish them. via

How long does it take for the smell to go away after refinishing hardwood floors?

Typically, as he mentioned, "full cure" (hardness) may not be reached for 10-14 days... and the fumes will probably dissipate over the following 10-12 days. The smell can be around for anywhere from 3-6 weeks, however. via

How long until polyurethane is safe?

The initial curing time of the polyurethane after it has been applied to a large portion of your home's floor can be up to 5 to 7 days. After this 5-7-day timeframe most of the polyurethane should be dry on the surface, and able to be lived on once again. via

How bad is breathing in polyurethane?

When left uncured, polyurethane can cause asthma and other breathing problems. Those who spend time in rooms that have uncured polyurethane floor treatments may also experience health issues like throat and eye irritation, nausea, vomiting, headaches, coughing, and shortness of breath. via

How long does it take bona traffic to cure?

CURING: The curing process takes approximately 3 days (80% cured after 1 day, 100% after 3 days). The floor may be w alked on after 24 hours but remains susceptible to scuffing or marring until completely cured. via

What happens if you don't sand between coats of polyurethane?

The answer is pretty clear: It is recommended to avoid sanding the final coat of polyurethane. Sanding the final coat scratches the surface and leaves behind a cloudy appearance. Only sand between coats of polyurethane to achieve a smooth finish and skip sanding the final coat. via

Can you wait too long between coats of polyurethane?

It's all about adhesion. When you recoat after 2 hours you get a chemical bond between layers. If you let it go longer than that, you need to wait 24 hours so it's hard enough to sand and get a mechanical bond. via

Is 2 coats of polyurethane enough?

For ideal results, you should use about three or four coats. You will also have to wait quite some time between coats, as this polyurethane takes longer to dry. No matter how many coats of polyurethane you apply, it will always be quite a time-consuming process when using an oil-based finish. via

Does Murphy's Oil soap dull floors?

Do NOT clean your floors with Murphy's Oil Soap, Mop and Glo, Orange Glo, Swiffer Wet Mop, furniture polish such as Pledge, vinegar, ammonia, or any pine cleaners! All of these cleaners, over time, will dull and damage the finish. via

Do you have to rinse off Murphy's Oil soap?

Answer: You use 1/4 c. soap in 1 gallon of warm water. I have never rinsed the floor afterward, but I do make sure that I get up all excess with a soft, dry towel or rag. via

Will bona ruin hardwood floors?

The most common cause of cloudy hardwood floors is using the wrong cleaner. Bona products are specially designed to protect floors and the environment. Bona cleaners won't dull your floors or leave behind any residue. via

Is it bad to breathe in floor stain?

Direct contact with the chemicals can cause skin irritation, and exposure to the vapors during installation and before the finish cures may cause eye, throat and nose irritation, breathing difficulties, headaches, nausea, asthma attacks or dizziness. via

How do you air out the floor after refinishing floors?

2 Answers. Turn up the heat while opening windows across the house. Put in fans in windows/doors blowing in the house on one or two sides. Just don't put fans blowing in all windows so air has an easier chance of escaping. via

Should I remove baseboards before refinishing hardwood floors?

As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. The only time that we would really want you to remove your base or shoe is if your floors have been refinished multiple times and the base was left on during that process. via

How long after staining floor Can I polyurethane?

While stain brands recommend a drying time of 12 to 24 hours, allowing the floor to dry between 24 and 48 hours ensures that it is completely dry before applying the water-based polyurethane -- especially when conditions are less than ideal. via

Can you walk on hardwood floors after staining?

On average, you can walk on the floors approximately 24 hours after the application of the final coat. We recommend that for hours 24-48 that you wear socks only - no shoes, no bare feet. Click here for more info on How long does it take to refinish hardwood floors. via

How long after staining can you seal?

After looking at the dry time of your stain product you can determine when you can apply a clear coat over the stained surface. The most common wait time after staining to apply a clear coat is 8 hours, waiting overnight is a great measurement. via

How do you protect newly refinished hardwood floors?

  • Stop dirt at the door. Grit stuck to the bottom of shoes is a finish-killer.
  • Prevent scratches. Put felt pads on the bottom of furniture legs.
  • Keep it clean. Vacuum regularly.
  • Renew the finish.
  • Beware of buildup.
  • via

    How many coats of polyurethane are necessary?

    Usually, you will need more coats of water-based polyurethane than you would with an oil-based product. Water-based polyurethanes are thinner liquids, which means that they will require four to five coats. Oil-based polyurethanes are thicker, and will need between three and four coats. via

    Why is my hardwood floor bumpy?

    Buckling of wood floors is when your floorboards rise, causing humps and uneven surfaces. Wood naturally expands and contracts as it reacts to environmental conditions. But severe expansions and contractions can prevent your hardwood floor from going back to its original shape. This is when buckling starts. via

    Will polyurethane smooth out rough wood?

    If you put polyurethane on a rough surface you will get a rough finish. Second, as @keshlam says, make sure there is no dust at all on the surface before you apply the finish. A slightly damp cloth can help pick up anything remaining (but make sure the wood is dry before you apply). via

    How do you fix rough spots on hardwood floors?

    Scuff the worn spot with sandpaper. Use 150-grit paper if the finish isn't completely worn through or if the floor is finished with oil. Use 120-grit paper to sand the finish around a spot from which it has completely worn. The coarser paper will cut back the finish more efficiently. via

    Leave a Comment

    Your email address will not be published. Required fields are marked *